IBM Intelligent Copper Pass-thru Module for IBM BladeCenter

16 995 kr Exkl. moms 526 kr/mån (Vid hyra 36 månader)
  • Lagerstatus: Beställningsvara
  • Frakt från: 139 kr
  • Artikelnr.
  • 5010435473
  • Tillv. art. nr.
  • 44W4483




  • Connection with up to 14 blade servers via 14-port copper ports
  • Direct one-one mapping to each blade server
  • Up to 1GB operation on uplinks
  • SoL support in bay 1
  • CKVM support in bay 1
  • Simple setup and monitoring via AMM
  • Standard switch form factor


  • Self-test and diagnostics capability
  • Simple connectivity - no special cables to buy
  • Configure to order capability


The Intelligent Copper Pass-thru Module (ICPM) for IBM BladeCenter (44W4483) is a low-cost solution, ideal for clients who want to use their existing switching infrastructure with IBM BladeCenter. It does not require any configuration and so is very easy to use.Pass-thru modules are I/O options that can be used for direct connections of blade ports to the external infrastructure devices such as network switches. The Pass-thru module is almost like a traditional network patch-panel - it routes internal blade ports to outside the BladeCenter. Current modules (used in non-high-speed bays) use a design that links several internal blade ports to a single external port on pass-thru module, so specific "hydra" or "octopus" pass-thru cables have to be used with pass-thru modules to provide standard external connections (one connector per each blade port).ICPM provides an unconfigured network connection that enables the blade servers in the BladeCenter unit to connect to an existing network infrastructure. No configuration of the copper pass-thru module is required. The ICPM provides a single connection from each blade to one RJ-45 connector, which can go directly to an external switch or patch panel from each of the 14 blades in the chassis to an RJ-45 plus for connection.If you install the ICPM in bay 1 of the chassis, it will route all Ethernet signals from controller 1 in each blade. Similarly, if you put an ICPM in bay 2, it will route all Ethernet controller 2 signals from each blade server.The ICPM has additional benefits such as support for SoL (Serial-over-LAN), concurrent KVM (cKVM), and security and statistics functionality - all through the existing BladeCenter advanced management module GUI.


Tillverkare IBM
Formfaktor Insticksmodul
Nätverkstyp Expansionsmodul
Enhetstyp Expansion module
Anslutningar 14 ( internal ) ¦ 14 - RJ-45 ( external ) ¦ 2 x management (100Base-TX) ( internal )
Nätverk och kommunikation
Anslutningsteknik Kabelansluten
Datalänkprotokoll 100Mb LAN, Gigabit LAN, Fast Ethernet, Gigabit Ethernet
Dataöverföringshastighet 1000 Mbps
Kompatibel standard IEEE 802.3ae
Network & Communication
Data Link Protocol Gigabit Ethernet, Fast Ethernet
Standarder som följs
Kompatibel standard FCC Class A certified, C-Tick, CISPR 22 Class A, EN55022, EN55024, UL 60950-1, IEC 60950-1, CSA C22.2 No. 60950-1-03, RoHS
Mått och vikt
Yttermått bredd 2.9 cm
Yttermått djup 26 cm
Yttermått höjd 11.2 cm
Typ av kablage Ethernet 100Base-TX, Ethernet 1000Base-T
Form Factor Plug-in module
Service och support
Service & support 1 år
Service & Support detaljer 1 år